Wooden planes EKO are the most affordable line of planes with solid beech body and all the aspects of full-featured carpenters plane.


Line CLASSIC is a classical type of wooden planes known from carpenter’s history. It has some fea-tures of the premium line, e.g. solid hornbeam sole or ergonomic body.


Planes PREMIUM were designed to satisfy the requirements of today’s customers. Practical innovation is the adjustable blade mechanism, which allows easy and quick setup even for beginners. We introduced this type in 2017.

ilustracni - 3-xx Eko.jpg

 

 

ilustracni - eko.jpg

ilustracni - 3-xx Classic.jpg

 

 

ilustracni - standard.jpg

ilustracni - 3-xx NEW Premium.jpg

 

 

ilustracni - premium.jpg

Body of plane

EKO

CLASSIC

PREMIUM

Body material

solid beech

solid beech, solid hornbeam

solid beech, solid hornbeam

Body ergonomy

-

yes

yes

Narrowed mouth

-

yes

yes

Ergonomic rear handle

-

yes

yes

Adjustable blade mechanism
(rabbet plane has adjustable front sole)

-

-

yes

Plane packed in foil

yes

-

-

Plane pcked in carton
(with seal)

-

yes

yes

 

Blades

EKO

STANDARD

PROFI

Blade quality

carbon tool steel, 58 HRC

carbon tool steel, better durability than EKO, hardened and tempered to 58 HRC

alloy tool steel, biggest durability, hardened and tempered to 60 HRC

Protection against rust

A layer of transparent paint is used against rust.

A layer of transparent paint is used against rust.

Blade is oiled and hermeti-cally sealed in a foil.

 

Scrub Plane EKO

1-xx Eko.jpgThe Scrub Plane EKO is made as an economic wooden plane (economic alternative to the Scrub Plane), the body, sole and foot are made of solid beech. The Scrub Plane is used for the initial processing of roughly cut boards or planks. The plane leaves tracks on the planed surface, which can be easily flattened with a couple more strokes by the Bench Plane or Jack Plane. The bed angle is 45 degrees. By reversing the blade, the angle increases to 75 degrees. This "trick" is mainly used for roughing out extremely hard types of wood. We supply variant E/E with blade EKO, variant E/S with blade STANDARD.

 

Scrub Plane CLASSIC

1-xx Classic.jpgThe Scrub Plane is used for the initial processing of roughly cut boards or planks. The plane leaves tracks on the planed surface, which can be easily flattened with a couple more strokes by the Bench Plane or Jack Plane. The bed angle is 45 degrees. By reversing the blade, the ang-le increases to 75 degrees. This "trick" is mainly used for roughing out extremely hard types of wood. The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Scrub Plane PREMIUM

1-xx NEW Premium.jpgThe Scrub Plane is used for the initial processing of roughly cut boards or planks. In the production of the Scrub Plane PREMIUM, special attention is given to the quality of processing, ergonomics and comfortable handling. The Scrub Plane PREMIUM is therefore ideal for extended periods of working hours. The plane leaves tracks on the planed surface, which can be easily flattened with a couple more strokes by the Bench Plane or Jack Plane. The bed angle is 45 degrees. By reversing the blade, the angle increases to 75 degrees. This "trick" is mainly used for roughing out extremely hard types of wood. The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. PREMIUM planes feature adjustable blade mechanism allowing quick and accurate blade setting, which is ideal for beginners. We supply variant P/S with blade STANDARD, variant P/P with blade PREMIUM.

 

Bench Plane EKO

2-xx Eko.jpgThe Bench Plane EKO is made as an economic wooden plane (economic alternative to the Bench Plane), the body, sole and foot are made of solid beech. The Bench Plane is used for the initial processing of roughly cut boards and planks, or as a follow-up after using the Scrub Plane. Unlike the Scrub Plane, the Bench Plane does not leave uneven tracks on the surface of the wood. Its blade is straight, leaving a flat surface. The quality of the planed surface can be improved and smoothed with the Jack Plane (shaping of soft woods) or with the Smoothing Plane (medium-hard and hard woods). We supply variant E/E with blade EKO, variant E/S with blade STANDARD.

 

Bench Plane CLASSIC

2-xx Classic.jpgThe Bench Plane is used for the initial processing of roughly cut boards and planks, or as a fol-low-up after using the Scrub Plane. Unlike the Scrub Plane, the Bench Plane does not leave uneven tracks on the surface of the wood. Its blade is straight, leaving a flat surface. The quality of the planed surface can be improved and smoothed with the Jack Plane (shaping of soft woods) or with the Smoothing Plane (medium-hard and hard woods). The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Bench Plane PREMIUM

2-xx NEW Premium.jpgThe Bench Plane is used for the initial processing of roughly cut boards and planks, or as a follow-up after using the Scrub Plane. Unlike the Scrub Plane, the Bench Plane does not leave uneven tracks on the surface of the wood. Its blade is straight, leaving a flat surface. The quality of the planed surface can be improved and smoothed with the Jack Plane (shaping of soft woods) or with the Smoothing Plane (medium-hard and hard woods). In the production of the Bench Plane PREMIUM, special attention is given to the quality of processing, ergonomics and comfortable handling. The Bench Plane PREMIUM is therefore ideal for extended periods of working hours. The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. PREMIUM planes feature ad-justable blade mechanism allowing quick and accurate blade setting, which is ideal for beginners. We supply variant P/S with blade STANDARD, variant P/P with blade PREMIUM.

 

Jack Plane EKO

3-xx Eko.jpgThe Jack Plane EKO is made as an economic wooden plane (economic alternative to the Jack Plane), the body, sole and foot are made of solid beech. The Jack Plane has a blade with a chip breaker and is used for fine smoothening or finishing surfaces. The bed angle is 45 degrees. The chip breaker breaks chips from the planed material and removes them away from the planed surface. The plane is used for the smoothing of soft wood whereas for the finishing of hard wood the Smoothing Plane is used (the blade with the chip breaker of the Jack Plane is inserted at a steep angle to the planed material). We supply variant E with blade EKO, variant ES with blade STANDARD.

 

Jack Plane CLASSIC

3-xx Classic.jpgThe Jack Plane has a blade with a chipbreaker and is used for fine smoothening or finishing surfaces. The bed angle is 45 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The plane is used for the smoothing of soft wood whereas for the finishing of hard wood the Smoothing Plane is used (the blade with the chipbreaker of the Jack Plane is inserted at a steep angle to the planed material). The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Jack Plane PREMIUM

3-xx NEW Premium.jpgThe Jack Plane has a blade with a chipbreaker and is used for fine smoothening or finishing surfaces. The bed angle is 45 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The plane is used for the smoothing of soft wood whereas for the finishing of hard wood the Smoothing Plane is used (the blade with the chipbreaker of the Jack Plane is inserted at a steep angle to the planed material). The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture. In the production of the Jack Plane PREMIUM, special attention is given to the quality of processing, ergonomics and comfortable handling. The Jack Plane PREMIUM is therefore ideal for extended periods of working hours. The Jack Plane PREMIUM features adjustable blade mechanism allowing quick and accurate blade setting, which is ideal for beginners. We supply variant P/S with blade STANDARD, variant P/P with blade PREMIUM.

 

Smoothing Plane CLASSIC

3A-xx Classic.jpgThe wooden Smoothing Plane has a blade with a chipbreaker and is used for fine smoothening or finishing surfaces. The bed angle is 49 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The plane is used for the smoothening of both hard wood and veneer surfaces. Whereas the Jack Plane is used for the finishing of soft wood (the blade with the chipbreaker of the Smoothing Plane is inserted at a steep angle to the planed material). The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Smoothing Plane PREMIUM

3A-xx NEW Premium.jpgThe wooden Smoothing Plane has a blade with a chipbreaker and is used for fine smoothening or finishing surfaces. The bed angle is 49 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The plane is used for the smoothening of both hard wood and veneer surfaces. Whereas the Jack Plane is used for the finishing of soft wood (the blade with the chipbreaker of the Smoothing Plane is inserted at a steep angle to the planed material). The sole is made of high quality solid hornbeam, the body is made of high quality solidbeech, both are dried down to 10 % moisture content. In the production of the Smoothing Plane PREMIUM, special attention is given to the quality of processing, ergonomics and comfortable handling. The Smoothing Plane PREMIUM is therefore ideal for extended periods of working hours. The Smoothing Plane PREMIUM features adjustable blade mechanism allowing quick and accurate blade setting, which is ideal for beginners. We supply variant P/S with blade STANDARD, variant P/P with blade PREMIUM.

 

Jointer Plane EKO

6-xx Eko.jpgThe Jointer Plane EKO is made as an economic wooden plane (economic alternative to the Jack Plane), the body, sole and foot are made of solid beech. The Jointer Plane is a long plane with a handle at the back. The Plane has a blade with a chip breaker and is used for the flattening and smoothening of large surfaces. The bed angle is 45 degrees. The chip breaker breaks chips from the planed material and removes them away from the planed surface. We supply variant E/E with blade EKO, variant E/S with blade STANDARD.

 

Jointer Plane CLASSIC

6-xx Classic.jpgThe Jointer Plane is a long plane with a handle at the back. The Plane has a blade with a chipbreaker and is used for the flattening and smoothening of large surfaces. The bed angle is 45 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfor-table handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Jointer Plane PREMIUM

6-xx NEW Premium.jpgThe Jointer Plane is a long plane with a handle at the back. The Plane has a blade with a chipbreaker and is used for the flattening and smoothening of large surfaces. The bed angle is 45 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. In the production of the Jointer Plane PREMIUM, special attention is given to the quality of processing, ergonomics and comfortable handling. The Jointer Plane PREMIUM is therefore ideal for extended periods of working hours. The Jointer Plane PREMIUM features adjustable blade mechanism allowing quick and accurate blade setting, which is ideal for beginners. We supply variant P/S with blade STANDARD, variant P/P with blade PREMIUM.

 

Toothing Plane CLASSIC

9-45.jpgThe Toothing Plane is ideal for roughing surfaces before gluing to achieve a stronger connection. The sole is made of high quality solid hornbeam, the body is made of high quality solid beech, both are dried down to 10 % moisture content. The bed angle is 80 degrees. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

 

 

Rabbet Plane EKO

10-xx Eko.jpgThe Rabbet Plane EKO is made as an economic wooden plane (economic alternative to the Rabbet Plane), the body, sole and foot are made of solid beech. The Rabbet Plane is a narrow plane, which is perfect for planing slots, half slots, sills, or rabbets on doors and window frames. The blade is inserted near the center of the body, the bed angle is 45 degrees and the blade cover the entire width of the plane. We supply variant E/E with blade EKO, variant E/S with blade STANDARD.

 

Rabbet Plane CLASSIC

10-xx Classic.jpgThe Rabbet Plane is a narrow plane, which is perfect for planing slots, half slots, sills, or rabbets on doors and window frames. The body is made of high quality solid beech, the sole from high quality solid hornbeam, both are dried down to 10 % moisture content. The blade is inserted near the centre of the body, the bed angle is 45 degrees and the blade covers the entire width of the plane. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Rabbet Plane PREMIUM

10-xx NEW Premium.jpgThe Rabbet Plane is a narrow plane, which is perfect for planing slots, half slots, sills, or rabbets on doors and window frames. The body is made of high quality solid beech, the sole from high quality solid hornbeam, both are dried down to 10 % moisture content. The blade is inserted near the centre of the body, the bed angle is 45 degrees and the blade covers the entire width of the plane. In the production of the Rabbet Plane PREMIUM, special attention is given to the quality of processing, ergonomics and comfortable handling. The Rabbet Plane PREMIUM is therefore ideal for extended periods of working hours. The Skew Rabbet Plane PREMIUM features an adjustable sole. Thanks to its simple slide mechanism, it enables quick set up of the blade. We supply variant P/S with blade STANDARD, variant P/P with blade PREMIUM.

 

Stepped Rabbet Plane CLASSIC

11-xx Classic.jpgThe Stepped Rabbet Plane is a narrow and short plane, the blade reaches the front edge of the plane body and the bed angle is 45 degrees. The plane is mainly used for the finishing of rabbets on doors or window frames and corners, where the Rabbet Plane does not reach. The body is made of high quality solid beech, the sole from high quality solid hornbeam, both are dried down to 10 % moisture content. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Stepped Rabbet Double Plane CLASSIC

12-xx Classic.jpgThe Stepped Rabbet Double plane is a narrow plane, which is used for planing slots, half slots, sills, or rabbets on doors and window frames. The blade is inserted near the centre or at the edge of the plane body, the bed angle is 45 degrees and the blade covers the entire width of the plane. The Plane is a combination of the Rabbet Plane and the Stepped Rabbet Plane. The body is made of high quality solid beech, the sole from high quality solid hornbeam, both are dried down to 10 % moisture content. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Skew Rabbet Plane CLASSIC

10-xx Classic.jpgThe Skew Rabbet Plane is a narrow plane, which is used for planing slots, half slots, sills, or rabbets on doors and window frames. The blade is inserted near the centre of the body, the bed angle is 45 degrees and the blade covers the entire width of the plane. The blade´s edge is accurately fixed in a position so that it is able to cut into the material gradually instead of cutting with the whole blade´s edge. The blade is skewed at a 25 degree angle. The body is made of high quality solid beech, the sole from high quality solid hornbeam, both are dried down to 10 % moisture content. In the production of CLASSIC planes, special attention is given to the quality of processing, ergonomics and comfortable handling. We supply variant C/S with blade STANDARD, variant C/P with blade PREMIUM.

 

Skew Rabbet Plane PREMIUM

10-xx NEW Premium.jpgThe Skew Rabbet Plane is a narrow plane, which is used for planing slots, half slots, sills, or rabbets on doors and window frames. The blade is inserted near the centre of the body, the bed angle is 45 degrees and the blade covers the entire width of the plane. The blade´s edge is accurately fixed in a position so that it is able to cut into the material gradually instead of cutting with the whole blade´s edge. The blade is skewed at a 25 degree angle. The body is made of high quality solid beech, the sole from high quality solid hornbeam, both are dried down to 10 % moisture content. In the production of the Skew Rabbet Plane PREMIUM, special attention is given to the quality of processing, ergonomics and comfortable handling. The Skew Rabbet Plane PREMIUM is therefore ideal for extended periods of working hours. The Skew Rabbet Plane PREMIUM features an adjustable sole. Thanks to its simple slide mechanism, it enables quick set up of the blade. We supply variant P/S with blade STANDARD, variant P/P with blade PREMIUM.

 

Blades for wooden planes

6-602.jpg

 

 

 

 

 

Wooden plane hardware kit

KIT (with chipbreaker).jpgWooden plane hardware kit contains plane blade PREMIUM and adjustable blade mechanism. With this kit you can build your own individual plane by your specifications. Wooden parts are not included.

 

 

Wooden box for planes CLASSIC and PREMIUM

WPB 3.jpg

Protective plane gift box made from solid beech. The boxes are compatible with CLASSIC and PREMIUM planes.